UL Group II Mechanical Dial Lock Instructions
How to Open a Group II Mechanical Lock
Video Transcript:Hi, my name is John Dean and I'd like to show you an easy way to open up a group two lock whether it's an S&G, Lagard, Kaba, doesn't matter. All the group two locks open up exactly the same way. Now the first thing I want you to do, trick number one is I want you to write down left, right, left, right and then next to that, four, three, two, one, that's the sequence that we are going to be using to dial this safe open, right now. To follow our sequence first thing you do is, you turn it four times to the left. You sneak up on your first number, in this case it's fifty, and you want to make sure that the crows foot is directly above it, ignore the other mark, this is the one that counts. Our second number is twenty-four you pass Twenty-four once, going to the right, pass it twice, and we're going to stop at twenty four our third time. Bang there we go. Our last number is sixty-five you pass sixty-five, once, you stop your second time. We're almost home. Now you go to the right, and right about, somewhere, between ninety-five and five, it kind of pulls itself in, and you want to pull it a little further, it'll stop somewhere between eighty-five and ninety-five, now that's retracting the bolts, at this point this safe is unlocked, and you just open it up. Now one last note in locking the safe, all group two locks, you must turn them to left four or more times, if you don't do that you're safe is a really locked and it can be easily manipulated opened. Now by the way, if you want these instructions in PDF form, I'm going to put in a link over here on the information thing, on the little more info, so you can go directly and print down a PDF. Watch the video couple of times you'll get the drift of it, it's pretty easy to do. Thank you very much